Scan
Wechat
1. The electrical control cabinet must be sealed;
2. The top plate of the electrical control cabinet cannot be bent by the top mounted air conditioner, and the top plate shall be strengthened if necessary;
3. Pay attention to the discharge of condensate. After installation, the condensate pipe should be inserted into the outlet hole to prevent the condensate water from entering the cabinet. Now there are manufacturers that produce air conditioners without condensate discharge (condensate vaporizes rapidly).
4. A door switch shall be installed. When the door is opened, the air conditioning device shall be cut off to avoid condensation in the cabinet. At the same time, the air conditioning device can be switched on again after the door is closed for 5 minutes;
5. Keep the air circuit in the cabinet unblocked and avoid blocking at the air inlet and outlet.
With the growing maturity of air conditioning technology, more and more users have put forward the requirements of adding air conditioner to the electrical control cabinet. Now many manufacturers have produced various specifications of wall mounted and top mounted air conditioners, with the maximum cooling capacity of more than 6000 watts, which can meet the requirements of various users. In addition, in order to meet the needs of heat dissipation and ventilation of outdoor electrical control cabinet, some manufacturers also produce outdoor air conditioners.
Scan
Wechat
Copyright:Suzhou Yi Jue Electronic Technology Co., Ltd 蘇ICP備16031206號(hào)-1
Add:1258 jinfeng south road, d-624 Linkman:Chen Tel:0512-65892185 Pho:13814801390
Technical support:RBWL